As it pertains to HII, NVMs can still be updated via FMP.
General: Due to the previous bugs in PF-to-port mapping in both NVM and UEFI Driver, old NVMs are not compatible with the new UEFI driver. General: When RX/TX pause frames are enabled and the system is rebooted, or when the icen driver is unloaded, occasionally only one PF can be visible on ESX. This change affects the following drivers: ice, version 1.9.7.1, i40e, version 2.20.10, iavf, version 4.6.0, rdma, version 1.10.5 This was done to avoid potential conflicts with the kernel and other vendors. The auxiliary.ko filename has been changed to intel_auxiliary.ko.
ICE driver support for VXLAN/GRE in switchdev mode ICE driver support for GTP via switchdev and tc - OOT Linux support for RDMA RoCEv2 link aggregation in dual-port active-backup configuration Support for Linux Real Time Kernel 5.x and 4.x Support for Debug Dump feature on Windows, FreeBSD, and ESXi Pruning of packets on bonded interfaces might be disabled. FEC configuration through UEFI HII for 25G adapters i40e Linux driver allows speed adjustment with ethtool. Support for FreeBSD 13.1 on most devices (not supported on Intel Ethernet E820 Series devices) Microsoft Azure Stack HCI, new feature release However, updating to the Release 27.7 drivers is supported and recommended. If you must update the NVM, a power cycle reset to re-establish the link is required. Customers - do not update the NVM at this time. Important: An issue has been identified with the NVM Update for the Intel Ethernet Network Adapter E810-XXVDA4T adapters. The NVM Update Packages have been modified for the 700 Series (9.10) and E810 Series (4.10) We recommend downloading smaller files for your operating system if you don't need software for every OS.
Not all Intel Ethernet Adapters and Intel Ethernet Controllers are supported under every version of Windows, Linux, or FreeBSD. zip file contains all of the Intel Ethernet network drivers and software for currently supported versions of Windows, Linux, and FreeBSD for most Intel Ethernet Adapters. In case we do not hear from you, we will make a follow up after 3 workings days. If you have questions, please let us know. I tried to check the website of your board and at the moment, the supported OS is still Windows 10. Since your Network adapter is onboard, have you tried to check with Asus if the board already supports Windows 11 and if yes, do they have a complete set of drivers including the network adapter that will work with the OS. Please check the link below for reference: Upon checking, I219-V is not yet validated for Windows 11 and if you are going to open the readme text files of the driver that you download, the driver is for Windows 10 as of the moment. Thank you for the quick reply and for providing the details that we requested.
0 kommentar(er)
